Lane Shark Attachments
Lane Shark makes front-mounted brush cutters and tractor attachments that help clear fence lines, trails, pond banks, roadsides, hunting lanes, and other overgrown areas. They’re a great option for landowners who want better visibility, easier control, and a more efficient way to clean up their property.
Lane Shark LS-3
The Lane Shark LS3 is a versatile front-mounted brush cutter built for compact tractors. With a 32" cutting diameter, it’s designed for tractors weighing at least 2,000 lbs with 5–8.5 GPM hydraulic flow, making it a strong option for clearing brush, trails, fence lines, and overgrown areas with better visibility and control.
Make: Lane Shark
Model: Lane Shark LS-3
Category: Brush Cutters, Lane Shark
Call For Pricing
DETAILS:
- Hydraulic implement flow rate 5 to 8.5gpm
- Weight: 320lbs
- We do not recommend rear remote plumbing as some tractors may lose loader priority
- 32” cutting diameter
- Cutting Capacity 2" to 3"
- 11 Cuttingh Positions
- Deck Construction: 1/8” Please Reinforced with 1/4"
- 2 Double Sided Blades
- Loader Compatibility: SSQA, JD Pin, Global (adapter required)
- Max Required Tractor Weight: 2,000lbs
Lane Shark LS-4
The Lane Shark LS4 is a front-mounted, multi-position brush cutter built for tractors weighing at least 3,000 lbs with 8.5–20 GPM hydraulic flow. With a 44" cutting diameter and a wide range of cutting positions, the LS4 is designed to make clearing brush, overgrown vegetation, fence lines, trails, and hard-to-reach areas faster, easier, and more efficient.
Make: Lane Shark
Model: Lane Shark LS-4
Category: Brush Cutters, Lane Shark
Call For Pricing
COMPATIABILITY:
- Hydraulic implement flow rate 8.5gpm to 14.9gpm – Standard motor
- Hydraulic implement flow rate 15gpm to 20gpm – High capacity motor (Special Order Only)
- Hydraulic rear remotes* or third function. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
- We do not recommend rear remote plumbing as some tractors may lose loader priority
- NOT COMPATIBLE WITH DIVERTER VALVES
- Minimum dry tractor weight of 3000 lbs
- Minimum tractor width of 55 inches
- Certified roll over protection system
- For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.
DETAILS:
- The Lane Shark LS4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
- Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
- Multi-position adjustment rail for added versatility and an extra foot of vertical extension
- The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
- Rear rubber skirt and skid shoes for a smoother cutting process
- The Lane Shark LS4 weighs just under 450 lbs.
- When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
- NOT COMPATIBLE WITH SKID STEERS
Lane Shark Hammer Head
The Lane Shark Hammerhead is a patented, hydraulically articulated, multi-position brush cutter built for tractors weighing at least 3,000 lbs with 8.5–20 GPM hydraulic flow. With a 44" cutting diameter and vertical/offset cutting positions from 25 to 55 degrees, it’s designed to clear overgrown vegetation, thick brush, brambles, saplings, fence lines, trails, and hard-to-reach areas with better control and efficiency.
Make: Lane Shark
Model: HAMMERHEAD
Category: Brush Cutters, Lane Shark
Call For Pricing
COMPATIABILITY:
- Hydraulic implement flow rate 8.5gpm to 20gpm
- Must have a third function to operate. Must have a WR Long C-Flow component OR return direct to sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
- NOT COMPATIBLE WITH DIVERTER VALVES
- Minimum dry tractor weight of 3000 lbs
- Minimum tractor width of 55 inches
- Must have certified roll over protection system
- For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.
DETAILS:
- Hammerhead control switch box included
- Cutting width / cutting area of 44"
- Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44″. The Hammerhead has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
- The Lane Shark Hammerhead attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
- Rear rubber skirt and skid shoes for a smoother cutting process
- The Lane Shark Hammerhead weighs just under 550 pounds
- When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
- NOT COMPATIBLE WITH SKID STEERS